Products

Metal Roof Solution M1

This is the mounting structure that follows the roof profile and no angles is erected between solar module and metal roof.

The main components are fixation parts (clamps), rails, L feet and other accessories.

We have different solutions for Kalzip, Kliplok, Trapzoidal, Standing Seam and many other types of metal roofs.

Metal Roof Solution M2

This is the mounting structure will be erected on the metal roof with an angle, normally it’s suggest not exceeding 15° in view of structural safety.

It can be done by different length of front and rear L feet or legs, and the main components are fixation parts (clamps), rails, L feet and other accessories.

We have different solutions for Kalzip, Kliplok, Trapzoidal, Standing Seam and many other types of metal roofs.

 

Tile Roof Solution

We have different hooks to suit a variety of roof tiles worldwide, and we have also exlored adjustable hooks which gives flexibility of workers on site to adapt to the tile gap tolerances.

A lot of applications have been deployed in South Asia, Australia and other countries.

The main components are hooks, rails, mid and end clamps, weed washer, grounding lugs, etc

Other similiar solutions are also available, and we can customize the design upon requests and real situations.

 

Concrete Roof Solution RC1

This is PV mounting structure on RC Roof which needs on-site casting of concrete stumps, where the main poles will be erected.

No direct drilling is needed in such solution, but it needs a bit more labor in casting the concretes on site.

All concrete stump dimension and specifications will be given in the design drawings, the contractor can follow the drawing exactly to make the stumps.

The main components are main poles (front and rear), main beam, rails, mid and end clamps, weed washer, grounding lugs, etc

Other similiar solutions are also available, and we can customize the design upon requests and real situations.

 

Concrete Roof Solution RC2

This is PV mounting structure on RC Roof as counter weighed solution, which means the designed concrete stumps will sit on base rail afterward, and it needs no on-site casting. However, it needs a lot of concrete stumps to weigh down the system to withstand the wind lift-up and shear forces.

No direct drilling is needed in such solution, but it needs a bit more labor in carrying the conrete stumps to the roof. Weight of such system are comparatively heavier than other solutions, but you can remove the whole system freely and easily if the owner decides to tear down the system after certain years.

All concrete stump dimension and specifications will be given in the design drawings, the contractor can follow the drawing exactly to buy the stumps.

The main components are base rails, main poles (front and rear), main beam, rails, mid and end clamps, weed washer, grounding lugs, etc

Other similiar solutions are also available, and we can customize the design upon requests and real situations.

 

Grounded Installation G1

This is a fixed single-pole mounting solution for grounded solar PV system, which is very popuplar in Japan, Australia, Middle East, etc.

It requires heavier and more materials for the pole, as it need to penetrate into the soil up to 1-2 meters, depending on the soil condition and wind speed.

The main components are main poles (front and rear), main beam, rails, mid and end clamps, weed washer, grounding lugs, etc

Other similiar solutions are also available, and we can customize the design upon requests and real situations.

 

Grounded Installation G2

This is a adjustable single-pole mounting solution for grounded solar PV system, which is very popuplar in Japan, Australia, Middle East, etc.

It requires heavier and more materials for the pole, as it need to penetrate into the soil up to 1-2 meters, depending on the soil condition and wind speed.

The main components are main poles (front and rear), main beam, rails, mid and end clamps, weed washer, grounding lugs, etc

Other similiar solutions are also available, and we can customize the design upon requests and real situations.

 

Solar Carport Solution

We have full set solutions for double side and single side carpot solutions. Main materials are HDG and it’s very cost competitive.

Big projects and applications have been deployed in Japan, Singapore, Canada, USA and a lot of other countries.

The main components are main poles (front and rear), main beam, rails, mid and end clamps, weed washer, grounding lugs, etc

Other similiar solutions are also available, and we can customize the design upon requests and real situations.

 

PVSolver Solar System

As a professional manufacturer of mounting kits, PVSolver also works as an main EPC in China market.

We are able to supply grid-tied solar package from 1kW to MWs, off-grid solution to works as emergency UPS, hybrid solar system to work with grid or diesel generators, etc

The system is certified and with engineering support, and we can also customize the package to suit different requirements.